Learn About Standing Seam Metal Roofing

Learn About Standing Seam Metal Roofing

Standing seam roofing is one of the most durable and easy to maintain types of metal roofing and lasts for more than 30 years. Standing seam roofing can provide additional benefits in terms of energy efficiency and is simple to install and in many cases over the current roof material.

Its Standing Seam roofing panels can be constructed with a variety of radius roof profiles, making it perfect for structures that have multiple roof levels. This kind of metal roofing is comprised of vertical panels, with two seams in each panel, which are vertically positioned. After installation, its striking shadow lines continue to run from eave to ridge, emphasizing the pitch and the plan of each roof angle.

Standing Seam Metal Roof Installation

Standing seam roofs are constructed or put in place by crimping every seam together and sealing them into one joint. One of the primary benefits or advantages is the drainage of the roof. Standing seam panels should be placed in order, however, only after the suggested underlayment has been installed.

The underlayment is vital and you must select the best one. I would recommend using self-adhering water-shielded ice and self-ad. Standing seam panels typically measure around 18-24 inches in width when they are finished and run parallel to the roof’s slope.

The panels are joined to the underlayment with clips or fasteners that allow the steel to expand and expand as temperatures change. Utilizing a crimping tool join the seams using a crimping tool and repeat the crimping process until the entire panel is sewn.

There are four fundamental designs of standing seam panels:

  • Mechanically sealed
  • Symmetrical mechanically washed
  • One Piece Snap-Lock
  • Two-Piece Snap-Lock

The Advantages of Standing Seam Roofing

Standing seam metal roofs may be the best option for your roof over the roofing material you currently have. They last for an extended time and may even last for more than two times longer than roof shingles. Standing seam and metal roofs are constructed from aluminum, steel, and copper, so you’ll have a variety of options to select from. Metal roofs need minimum or no maintenance over time and could even stand up to winds of as high as 140 miles/hour if put in place correctly.

They also have fire-resistant properties, and they will not fall in the event of heavy snow or water loads However, it is important to choose the correct measurement to avoid damage from hail. Metal roofs can be made in a variety of colors and finishes to meet your architectural requirements of yours. Metal reflects the sun’s rays and helps reduce heat transfer to the home. In many instances standing seam roofing can cut down cooling costs by about 30 percent.

Standing Seam Disadvantages

Standing seam roofs made of metal are a great option for your construction project, but be aware that they could be a disadvantage too. Shingles can be an economical option however, high oil prices make shingles costly these days and bring them in line with standing seam costs.

A crucial aspect to take into consideration is that this may not be the ideal choice for roofing solutions if your roof’s slope is steep. Walking on roofs made of metal can be extremely dangerous, and therefore, extreme safety measures must be observed. Metal roofs are extremely difficult to put up on roofs with many vents, equipment, and chimneys as well as skylights.

How Much Standing Seam Roofing Costs

Standing seam costs will necessitate an inspection on-site to assess the viability of the installation and any other relevant details. In general, a complicated installation will add 10 percent of the material and labor expenses. When quoting a metal roof, make sure you include delivery underlayment, counter flashing vents, soffit and vents fasteners, and stack covers.

For instance, the standing seam panel 29 gauge 12″ will be approximately $2.45 for each linear foot. In comparison, the panel 29 gauge will cost close to $2.75 for each linear foot. These costs are estimates and could not represent the actual cost of the standing seam panel.

Types of Roof Trusses: Costs and Common Uses Previous post Types of Roof Trusses: Costs and Common Uses
What Is a Venture Capitalist? Next post What Is a Venture Capitalist?

Leave a Reply

Your email address will not be published. Required fields are marked *